Product ID:B-FLEX EPOXY, NON-SAGGING, PT. A
MSDS Date:04/21/1989
FSC:8040
NIIN:00N046031
MSDS Number: BTMNG

SOUNDCOAT COMPANY INC

ONE BURT DRIVE
DEER PARK, NJ 11729
US

Emergency Phone: 516-242-2200;800-424-9300(CHEMTEC)

Info Phone: 516-242-2200

Cage: IO656

SOUNDCOAT COMPANY INC

DEER PARK, NJ 11729 US

Telephone: 516-242-2200

Cage: IO656

ETHER, BIS(2,3-EPOXYPROPYL); (DIGLYCIDYL ETHER OF BISPHENAL

CAS: 2238-07-5

RTECS: KN2350000

Fraction By Weight: 95%

OSHA PEL N/K

ACGIH TLV: N/K

SILICIC ACID; (SILICA NON-DUSTING)

CAS: 7699-41-4

RTECS: VV8850000

Fraction By Weight: 5%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE, SKIN IRRITATION AND
SENSITIZATION AFTER REPEATED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SKIN IRRITATION.
Medical Cond Aggravated by Exposure:ALLERGY AND SKIN CONDITIONS.

First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN AND SEEK
MEDICAL ATTENTION IMMEDIATELY. SKIN: WASH IMMEDIATELY WITH SOAP AND
WATER. INHAL: REMOVE TO FRESH AIR. GIVE OXYGEN IF NECESSARY.
INGEST: IF CONSCIOUS, GIVE LARGE AMOUNTS OF WATER. GET IMMED
MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:280F,138C
Extinguishing Media:CO2, WATER, FOAM, TREAT AS CLASS B FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:ABSORB WITH INERT MATERIAL (SAND,
VERMICULITE), SWEEP OR SCOOP UP AND PUT INTO DISPOSAL CONTAINER,
FLUSH AREA IMMEDIATELY WITH PLENTY OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL PLACE AWAY FROM SPARKS
AND OPEN FLAME.
Other Precautions:AVOID CONTAMINATION OF SKIN, EYES, CLOTHING. DO NOT
INHALE OR BREATHE VAPORS. USE APRON, GLOVES AND RESPIRATOR.

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:LOCAL EXHAUST: HIGHLY RECOMMENDED. MECHANICAL: DESIRABLE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:USE COVERALLS AND APRON TO PROTECT AGAINST
SKIN.
Work Hygienic Practices:MINIMIZE SKIN CONTACT, WASH IMMEDIATELY AFTER
USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:500F,260C
Spec Gravity:1.1 (H2O=1)
Evaporation Rate & Reference:< 40 MG/FT 2/HR @ 72F
Appearance and Odor:WHITE PASTE WITH PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, AMINES, BASES AND MERCAPTANS.
Stability Condition to Avoid:STRONG ACIDS, AMINES, BASES AND
MERCAPTANS.
Hazardous Decomposition Products:CARBON MONOXIDE OR CARBON DIOXIDE UPON
THERMAL DECOMPOSITION.
Conditions to Avoid Polymerization:USE IMMEDIATELY AFTER MIXING BATCHES
SIZES LARGER THAN 1 LB.

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.